Instarect Limited

Font Size



For sliding  gates weighing
up to 2500 kg. With built-in control unit and inverter. Equipped
with Nice BlueBUS technology, compatible for operation with Nice Opera system.
Suitable to operate in extreme conditions, ideal for intensive use.
Pressure die-cast
aluminium base and release, with epoxy painting
Compartment for control unit and inverter, protected by
a removable box
Perfect movement: the inverter enables the power supply and drive of the 3-phase motor with single-phase current at 230 Vac, acting on the frequency to adjust speed
of the automation from a minimum
of 8.2 m/min to maximum 15.4 m/min. In the automation deceleration phase,
the inverter, which dialogues with the control unit, increases the torque, thus improving performance and reducing the risk of the automation blocking on impact with obstacles.
Simple  to install: the BlueBUS system
enables connections by means of just two wires between the control unit and up to 15 control safety and signalling devices.
Safe: the acceleration settings (at the start of the manoeuvre) and the deceleration settings (at the end of the manoeuvre)
are precise and reliable.
The temperature sensor:  Run is able
to manage force, adapting it to the different climatic and environmental conditions,
while adapting the thermal cut-out protection and intensity of self-ventilation, depending
on the temperature reading.
A master/slave selection also automatically synchronises 2 motors, enabling the automation of sliding gates with two opposing leaves.
Practical and functional: the control unit
and inverter housed inside Run, can be simply connected by means of the practical connector guide.
Very quiet: gear motor on bearings.


You are here: Home Walls Guide Run 2500I